Executing action Run deviceof Could not run device,why sir?

[chun]

 

[chun]

pleass helppp ((

 

[VladZen]

1. Disable Hyper-V mode in your OS, see details here.
2. Try to select another method of capturing the image in program settings>Android tab.
3. Make sure Proxifier app was installed along with ZennoDroid and can be run separately.

If all this won't help, please make diagnostic report per instructions here.

 

[chun]

1. Disable Hyper-V mode in your OS, see details here.
2. Try to select another method of capturing the image in program settings>Android tab.
3. Make sure Proxifier app was installed along with ZennoDroid and can be run separately.

If all this won't help, please make diagnostic report per instructions here.

hyper v tidak ada di program saya,
tidak ada proxifier dalam menginstal bisakah diinstal secara terpisah?

 

[VladZen]

hyper v tidak ada di program saya,
tidak ada proxifier dalam menginstal bisakah diinstal secara terpisah?

Then you should reinstall ZennoDroid and allow proxifier during installation.

 

[chun]

Then you should reinstall ZennoDroid and allow proxifier during installation.

when installing there is no allow proxifier sir, and I have downloaded it separately, the same thing still happens
can anydesk sir

 

[VladZen]

If all this won't help, please make diagnostic report per instructions here.

 

[chun]

or should I do this?
but I can open the menu manually

https://support.bluestacks.com/hc/ru/articles/115003174386-%D0%9A%D0%B0%D0%BA-%D0%B2%D0%BA%D0%BB%D1%8E%D1%87%D0%B8%D1%82%D1%8C-%D0%B2%D0%B8%D1%80%D1%82%D1%83%D0%B0%D0%BB%D0%B8%D0%B7%D0%B0%D1%86%D0%B8%D1%8E-VT-%D0%BD%D0%B0-%D0%BC%D0%BE%D0%B5%D0%BC-%D0%9F%D0%9A-%D0%B4%D0%BB%D1%8F-%D1%83%D0%BB%D1%83%D1%87%D1%88%D0%B5%D0%BD%D0%B8%D1%8F-%D0%BF%D1%80%D0%BE%D0%B8%D0%B7%D0%B2%D0%BE%D0%B4%D0%B8%D1%82%D0%B5%D0%BB%D1%8C%D0%BD%D0%BE%D1%81%D1%82%D0%B8-BlueStacks-

 

[myndeswx]

You did not select anything, to work with emulator you must first use the 'select device' cube. (Before starting it)

 

[VladZen]

You did not select anything, to work with emulator you must first use the 'select device' cube. (Before starting it)

It should start random if device was not select.

 

[chun]

Anda tidak memilih apa pun, untuk bekerja dengan emulator Anda harus menggunakan kubus 'pilih perangkat' terlebih dahulu. (Sebelum memulainya)
[/MENGUTIP]
Saya sudah mencobanya sebelumnya, tetapi tidak berhasil juga

 

[VladZen]

Please repeat the error and make diagnostic report as I asked before. Here are the instructions.