Zennoposter Or Project maker dont load,not running at all

[randomuser3224]

I'am unable to run any of them since days ,formatted my windows 7 x64 SP1 Setup but still cant load ,here is the diagnostic report

 

[randomuser3224]

whenever My ip shows (dynamic IP) blacklisted on http://whoer.net/extended ,it doesn't run at all.

 

[rostonix]

1. Check if these config files are presented in software directory ZennoPoster.exe.config & ProjectMaker.exe.config
2. Try to reinstall .NET Framework
3. Can you open these URLs via browser? https://userarea-us.zennolab.com/ActivateHardware.asmx https://userarea.zennolab.com/ActivateHardware.asmx ?
4. Install Visual C++ redistributable 2008 and Visual C++ redistributable 2010
5. Make sure your server use IPv4
If it use Ipv6 connection will not work.
You can install this patch https://support.microsoft.com/en-us/kb/929852/ru-ru?wa=wsignin1.0

 

[randomuser3224]

1. Check if these config files are presented in software directory ZennoPoster.exe.config & ProjectMaker.exe.config
2. Try to reinstall .NET Framework
3. Can you open these URLs via browser? https://userarea-us.zennolab.com/ActivateHardware.asmx https://userarea.zennolab.com/ActivateHardware.asmx ?
4. Install Visual C++ redistributable 2008 and Visual C++ redistributable 2010
5. Make sure your server use IPv4
If it use Ipv6 connection will not work.
You can install this patch https://support.microsoft.com/en-us/kb/929852/ru-ru?wa=wsignin1.0

1.Yes
2.I reinstalled the complete windows OS ,leave .NET framework.
3.YES
4.Both are installed
5.It uses IPv4

It keeps on loading and then nothing happens and it exists without opening

 

[randomuser3224]

It ran for once and then the same shit again, so here is my latest report

 

[randomuser3224]

sometimes it opens and then this shows

 

[randomuser3224]

"No connection to Authorization server" mostly shows when my ip is blacklisted but even then iam able to open zenno userarea urls

 

[randomuser3224]

I have lost 5 days because of this ,please help!!

 

[rostonix]

When you have problems with authorization server, try to ping userarea-us.zennolab.com and userarea.zennolab.com
Which IP will be shown?
Please attach screenshots

 

[randomuser3224]

When you have problems with authorization server, try to ping userarea-us.zennolab.com and userarea.zennolab.com
Which IP will be shown?
Please attach screenshots

With my home IP and Ips of Cyberghost I have problems of Authrization server

 

[randomuser3224]

However it works with Hotspot shield which is quite slow

 

[Radzhab]

i hear that ZP work only ipv4. Rostonix, what you say about it?

 

[rostonix]

i hear that ZP work only ipv4. Rostonix, what you say about it?

That's kinda common problem for latest week. Maybe there was some windows update.
Try to install this support.microsoft.com/en-us/kb/929852/ru-ru?wa=wsignin1.0

 

[britalic]

1. Check if these config files are presented in software directory ZennoPoster.exe.config & ProjectMaker.exe.config
2. Try to reinstall .NET Framework
3. Can you open these URLs via browser? https://userarea-us.zennolab.com/ActivateHardware.asmx https://userarea.zennolab.com/ActivateHardware.asmx ?
4. Install Visual C++ redistributable 2008 and Visual C++ redistributable 2010
5. Make sure your server use IPv4
If it use Ipv6 connection will not work.
You can install this patch https://support.microsoft.com/en-us/kb/929852/ru-ru?wa=wsignin1.0

Hi there, I am not opening a new thread because this comes up in google and my problem is the same.

I have windows 7 just installed, all this above is checked as it should be except that that I have not tried to reinstall .NET and I haven't done that patch because I *can* open ZennoPoster, it is just ProjectMaker that won't load. It will display "Load modules" but then it just dies off so why would one work and not the other?

Any suggestion of what I can try is welcomed, anything at all to help me run ProjectMaker on this computer, thanks!

 

[VladZen]

Hi there, I am not opening a new thread because this comes up in google and my problem is the same.
I have windows 7 just installed, all this above is checked as it should be except that that I have not tried to reinstall .NET and I haven't done that patch because I *can* open ZennoPoster, it is just ProjectMaker that won't load. It will display "Load modules" but then it just dies off so why would one work and not the other?
Any suggestion of what I can try is welcomed, anything at all to help me run ProjectMaker on this computer, thanks!

First of all reinstall .NET Framework - https://www.microsoft.com/en-US/download/details.aspx?id=42642
Also install Visual C++ redistributable 2008 and Visual C++ redistributable 2010:
https://www.microsoft.com/en-US/download/details.aspx?id=15336
https://www.microsoft.com/en-US/download/details.aspx?id=14632

 

[britalic]

Hi, thanks for your help I did all that and also ran the MICROSOFT .NET FRAMEWORK REPAIR TOOL I got very close to wiping Windows 7 and then I tried the one thing I did not try and that was to reinstall ZennoPoster!! I did and it fixed it. I spent 9 hours after this silly thing today, thanks anyway

 

[azp]

I have similar problem.
Project Maker does not run. After starting it shows messages: Initialization, Updating licenses and nothing happens.
Zennoposter works flawlessly.
I have uninstalled and reinstalled Zennoposter, deleting data from appdata and programfiles.
Reinstalled .NET Framwork
I have installed older verison 5.9.8.1 - everything works
Updated to 5.10.1.0 - Project Maker does not work, Zennoposter works.
Any ideas ?

edit: tried v5.10.0.2.exe also everything works, but after updating it to 5.10.1.0 PM does not work, ZP works

 

[azp]

Is this some kind of a prank that nobody from administration is replaying here or in private to solve that issue ?

 

[VladZen]

Is this some kind of a prank that nobody from administration is replaying here or in private to solve that issue ?

Sorry for missing your request.
Make sure new version added to trusted in your antivirus and other protection software.
Please repeat the problem, then run diagnostic.exe from program folder and attach resulted report.zip

 

[azp]

I don't use any protection
Installed new version, successfully started ZP, tried multiple times to run PM - diagnostic attached

 

[VladZen]

I don't use any protection
Installed new version, successfully started ZP, tried multiple times to run PM - diagnostic attached

vcredist2008 not installed - https://www.microsoft.com/en-US/download/details.aspx?id=15336
also not latest net,framework version - https://www.microsoft.com/en-US/download/details.aspx?id=53344
So please install these components.

 

[azp]

That helped, thanks